| ||||||
Buy Alpine MRP-M200 Amplifier
High-quality Alpine power in an affordable amplifier! Alpine uses the same premium quality and engineering that it puts into its V12 amplifiers to make the V-Power amps. That means you'll get strong, steady, dependable output.
With a rugged look and high-tech features, the V-Power series has an amplifier for nearly any need. The mono-channel MRP-M200 can fill your system's bass-void with 200 watts RMS power for your dual-sub box, or 150 watts RMS for a single subwoofer.
By packing these amplifiers with performance-boosting extras, Alpine ensures that you have plenty of control over your music. The power-enhancing Bass Engine® gives you a built-in crossover with a sharp 24 dB per octave cut-off. Turn on the tuned Bass EQ for a 6 dB cut to dampen the frequencies below 30 Hz and a tunable 6 dB boost at 50 Hz to enhance the bass output.
A subsonic filter keeps your bass clean by blocking the inaudible frequencies below 15 Hz. The MRP-M200 also has a phase selector that lets you synchronize the bass with your mids and highs. The speaker-level inputs let you add one of these amps to any car stereo.
Key Features
- 150 watts RMS x 1 at 4 ohms
- 200 watts RMS x 1 at 2 ohms
- Requires 10-gauge power and ground leads — wiring and hardware not included with amplifier
- Bass Engine® features:
- Variable 50-200 Hz low pass crossover, 24 dB/octave
- Tuned Bass EQ (0-12 dB bass boost at 50 Hz)
- MOSFET power supply
- STAR Topology (minimizes internal noise and prevents ground interference)
- phase selector (for maximizing the effect of the bass in your vehicle)
speaker- and preamp-level inputs - gold-plated screw terminals
- blue power LED
- Dimensions: 11-1/16"W x 2-5/16"H x 10"D
Click here to bookmark this page
Do you have a question? Click here to ask at deCAF: Car Audio Forum!