| ||||||
Phoenix Gold QX100.2 Two Channel Amplifier
Designed
and engineered by the same maniacal engineers that brought you the acclaimed
Titanium Series, the completely rebuilt QX Series shatters the barrier
of price vs. performance. These amplifiers are simply the best technology
and build quality available at these prices.
The QX Series includes many features and technological advances only high priced amplifiers offer - certainly not available at this price range - UNTIL NOW! Things that make a difference like huge rail voltage capacitance (double the amount of the closest competitor), double-sided circuit board (unlike the unreliable single-sided boards most companies use at this price point), fully complimentary output stage and bi-polar technology. All of this leads to high-fidelity signal reproduction, increased dynamics and better reliability.
QX100.2 Features:
- Robust low ESR capacitance on the voltage rails
- A fully complimentary output stage that is balanced between both ends
of the heatsink allows for maximum heat dissipation
- All potentiometers and switches are located externally for easy adjustments
- All signal and power supply terminals are gold plated for protection
against corrosion and audio degradation
- A high quality, double-sided circuit board is used for the entire
amplifier. This ensures better reliability and a longer lifetime of
the amplifier
- All power and speaker terminals are screwed to the 18 gauge metal
end panels for "Makita Proof" durability
- Heavy-duty buss bars create a low impedance path to the power supply
- Superbrite™ blue power-on LED
- Built-in variable electronic crossover
- Adjustable 0 to +15 dB Twin-T™ 45 Hz bass boost
- Remote Monitoring Display output with the QX-Series Remote Display Unit
- Advanced overload and thermal protection circuitry
- PWM MOSFET power supply
- TAIM™ Muting circuitry for soft turn-on and turn-off
- Unique thermal black anodized heatsink finish with fly cut fins
- Optional QLINK/2 available for seamless installation of multiple amplifiers
- One (1) year manufacturer's warranty.
- Tri-linear™ capability allows simultaneous stereo and bridged mono operation
- Variable high pass crossover: 40-800 Hz, 12 dB/octave
- Variable low pass crossover: 40-800 Hz (12 dB or 24 dB/octave).
QX100.2 Specifications:
- Power output:
- 35 watts RMS x 2 (4 ohm load, 1% THD)
- 50 watts RMS x 2 (2 ohm load, 1% THD)
- 100 watts RMS x 1 (bridged into 4 ohms, 1 % THD)
- Frequency response: 20-20,000 Hz (± 1 dB)
- Signal to noise ratio: > 100 dB
- THD: < 0.02%
- Input sensitivity: 200mV-4V
- Minimum load stability for all channels: 2 ohms
- Dimensions: 8.75" L x 9.5" W x 2.1" H.
Click
Here to buy a Phoenix Gold QX100.2 at Parts Express
Click here to bookmark this page
Do you have a question? Click here to ask at deCAF: Car Audio Forum!