| ||||||
Buy Dayton 10 Inch Titanic MKII Subwoofer
Click
here to buy a Dayton 10 Inch Titanic MKII Subwoofer at Parts Express
The 10" Titanic MKII was designed to produce deep clean bass in a small enclosure. One possible design is a 1.5 cubic foot vented box tuned to 25Hz. This design produces clean, accurate bass down to 25Hz. At maximum power (300 watts) it will produce 114dB and remain linear to 21Hz! For automotive applications, we recommend a 0.50 cubic foot sealed box with 50% fill. With a Q alignment of 0.7 and the interior cabin gain of the automobile, this design will produce deep punchy bass. At full power it will produce over 114dB while never exceeding Xmax!
Dayton 10 Inch Titanic MKII Subwoofer Features and Specifications
- Cast Basket
- Composite Fiber Cone
- Santoprene Rubber Surround
- Flat Progressive Spider
- Power handling: 300 watts RMS/425 watts max.
- Voice coil diameter: 2"
- Voice coil inductance: 2.48 mH
- Nominal impedance: 4 ohms
- DC resistance: 2.5 ohms
- Frequency response: 25-400 Hz
- Magnet weight: 84 oz.
- Fs: 28 Hz
- SPL: 90.2 dB 2.83V/1m
- Vas: 1.35 cu. ft.
- Qms: 9.55
- Qes: .43
- Qts: .41
- Xmax: 16 mm
- Net weight: 19.5 lbs.
Click here to buy a Dayton 10 Inch Titanic MKII Subwoofer at Parts Express
Click here to bookmark this page
Do you have a question? Click here to ask at deCAF: Car Audio Forum!